Small crew energy. Serious work.

About Vancity Foam

We built this company for one thing: clean spray foam insulation in Greater Vancouver without confusing sales talk.

Call 604-373-9598 Free quote

Simple quotes
Clean installs
Local focus
604-373-9598

Free quoteNo drama.

Clean prepMask. Spray. Trim.

Code-awareAsk first.

Local crewGreater Vancouver.

Project photos

Real foam. Real spaces.

Installer spraying closed-cell spray foam insulation into wall framing in Vancouver — Closed-cell foam sprayed into wall framing.

Spray foam insulation installed between wall studs and roof framing — Fresh spray foam in a framed room.

Closed-cell spray foam being applied inside a framed wall cavity — Closed-cell foam filling a wall cavity.

Spray foam installer in protective suit applying insulation to a wall — Protected installer applying foam cleanly.

How we work

Look first. Spray second.

A spray foam job is won before the trigger is pulled. Prep decides the result. We care about access, masking, moisture, temperatures, thickness, substrate, and what happens after the foam cures.

That is why our quote process asks direct questions. What are you trying to fix? Cold? Damp? Noise? Energy loss? Renovation inspection? Commercial condensation?

Then we recommend the smallest scope that solves the real problem.

No bloated quote
No mystery foam
No messy finish
No pressure script

Code-ready work

Foam is only good when the prep is good.

Spray foam is not paint. It is a building envelope decision. We check moisture, access, ventilation, ignition-barrier needs, and assembly type before the rig starts.

For medium-density closed-cell polyurethane foam, BC code references CAN/ULC-S705.1 for the material standard. Installation details matter. Product, applicator, substrate, lift thickness, and curing conditions all need respect.

Simple rule. Right foam. Right place. Right thickness. Clean site. No mystery.

Moisture check before install
Open-cell vs closed-cell explained
Fire and thermal barrier conversation
Clean cut lines and sealed penetrations

Vancouver climate

Wet coast. Cold drafts. Tight cavities.

Greater Vancouver homes see rain, damp crawl spaces, older framing, and heat loss through rim joists, attics, garages, and basement walls. Spray foam helps because it insulates and air seals at the same time.

Closed-cell foam can add a strong air and vapour-control layer where the assembly calls for it. Open-cell foam can fit some interior sound and air-sealing uses. The best answer depends on the wall, roof, crawl space, and permit path.

We do not guess. We look first. Then we quote.

Crawl spaces
Rim joists
Garage ceilings
Attics and rooflines
Basement walls
Commercial metal buildings

Questions

Fast answers.

How much does spray foam insulation company Vancouver cost?

It depends on access, square footage, thickness, foam type, masking, removal, and whether ignition or thermal protection is needed. Call 604-373-9598 and we will price the real job.

Do you use open-cell or closed-cell foam?

Both can make sense. Closed-cell is common for air sealing, moisture control, and high R-value per inch. Open-cell can fit some interior and sound-control uses. The assembly decides.

Can spray foam help with drafts?

Yes. Spray foam expands into cracks and gaps, so it can reduce air leakage where batts alone leave paths for cold air.

Do I need to leave during install?

Usually yes during spraying and curing. We will explain timing before the job so people, pets, and trades stay clear.

Do you serve all of Greater Vancouver?

Yes. We focus on Vancouver, West Vancouver, North Vancouver, Burnaby, and nearby Lower Mainland areas.