Greater Vancouver

Service Areas

We install spray foam insulation in Vancouver, West Vancouver, North Vancouver, Burnaby, and nearby Lower Mainland communities.

Call 604-373-9598 Free quote

Vancouver
West Vancouver
North Vancouver
Burnaby

Free quoteNo drama.

Clean prepMask. Spray. Trim.

Code-awareAsk first.

Local crewGreater Vancouver.

Project photos

Real foam. Real spaces.

Installer spraying closed-cell spray foam insulation into wall framing in Vancouver — Closed-cell foam sprayed into wall framing.

Spray foam insulation installed between wall studs and roof framing — Fresh spray foam in a framed room.

Closed-cell spray foam being applied inside a framed wall cavity — Closed-cell foam filling a wall cavity.

Spray foam installer in protective suit applying insulation to a wall — Protected installer applying foam cleanly.

Installer preparing attic framing for spray foam insulation in Vancouver — Attic framing checked before insulation work.

Roofline insulation installed between rafters under open sky — Roofline insulation between attic rafters.

Technician blowing loose fill attic insulation between roof framing — Attic insulation added between framing.

Insulation contractor checking attic roof insulation with a hard hat — Contractor checking attic insulation details.

Purple closed-cell spray foam being applied along a roofline — Closed-cell foam applied along a roofline.

Contractors measuring attic insulation depth near a skylight in Vancouver — Insulation depth and roofline details measured.

Locations

Greater Vancouver foam.

Vancouver

Homes, suites, renovations, garages, and commercial spaces.

West Vancouver

Sloped lots, crawl spaces, ocean moisture, and custom homes.

North Vancouver

North Shore crawl spaces, rim joists, garages, and basements.

Burnaby

Residential, shop, warehouse, garage, and tenant improvement foam.

Map area

One crew. Many neighbourhoods.

The work changes by neighbourhood. North Shore crawl spaces. Vancouver renovations. Burnaby garages. West Vancouver slopes and access. Same foam principles. Different site details.

That is why we quote after asking the practical questions first. Where is the space? How big? How damp? Who needs access? What finish is coming after foam?

Then we give the clean plan.

Vancouver
West Vancouver
North Vancouver
Burnaby
Richmond
New Westminster
Coquitlam
Greater Vancouver

Code-ready work

Foam is only good when the prep is good.

Spray foam is not paint. It is a building envelope decision. We check moisture, access, ventilation, ignition-barrier needs, and assembly type before the rig starts.

For medium-density closed-cell polyurethane foam, BC code references CAN/ULC-S705.1 for the material standard. Installation details matter. Product, applicator, substrate, lift thickness, and curing conditions all need respect.

Simple rule. Right foam. Right place. Right thickness. Clean site. No mystery.

Moisture check before install
Open-cell vs closed-cell explained
Fire and thermal barrier conversation
Clean cut lines and sealed penetrations

Vancouver climate

Wet coast. Cold drafts. Tight cavities.

Greater Vancouver homes see rain, damp crawl spaces, older framing, and heat loss through rim joists, attics, garages, and basement walls. Spray foam helps because it insulates and air seals at the same time.

Closed-cell foam can add a strong air and vapour-control layer where the assembly calls for it. Open-cell foam can fit some interior sound and air-sealing uses. The best answer depends on the wall, roof, crawl space, and permit path.

We do not guess. We look first. Then we quote.

Crawl spaces
Rim joists
Garage ceilings
Attics and rooflines
Basement walls
Commercial metal buildings

Map

Greater Vancouver Area.

We focus on Vancouver, West Vancouver, North Vancouver, Burnaby, and nearby Lower Mainland communities.

Ask if we serve your address

Questions

Fast answers.

How much does spray foam insulation in Greater Vancouver cost?

It depends on access, square footage, thickness, foam type, masking, removal, and whether ignition or thermal protection is needed. Call 604-373-9598 and we will price the real job.

Do you use open-cell or closed-cell foam?

Both can make sense. Closed-cell is common for air sealing, moisture control, and high R-value per inch. Open-cell can fit some interior and sound-control uses. The assembly decides.

Can spray foam help with drafts?

Yes. Spray foam expands into cracks and gaps, so it can reduce air leakage where batts alone leave paths for cold air.

Do I need to leave during install?

Usually yes during spraying and curing. We will explain timing before the job so people, pets, and trades stay clear.

Do you serve all of Greater Vancouver?

Yes. We focus on Vancouver, West Vancouver, North Vancouver, Burnaby, and nearby Lower Mainland areas.