Local spray foam crew

Spray Foam Insulation Burnaby

Need spray foam insulation in Burnaby? Call 604-373-9598. We inspect, quote, and install clean foam for homes, strata, shops, garages, crawl spaces, attics, and commercial spaces across the North Shore and Greater Vancouver.

Call 604-373-9598 Free quote

Burnaby
Residential
Commercial
Free quote

Free quoteNo drama.

Clean prepMask. Spray. Trim.

Code-awareAsk first.

Local crewGreater Vancouver.

Project photos

Real foam. Real spaces.

Contractors measuring attic insulation depth near a skylight in Vancouver — Insulation depth and roofline details measured.

Insulation contractor checking attic roof insulation with a hard hat — Contractor checking attic insulation details.

Roofline insulation installed between rafters under open sky — Roofline insulation between attic rafters.

Spray foam insulation installed between wall studs and roof framing — Fresh spray foam in a framed room.

Burnaby

Local homes need tight air sealing.

Burnaby has a mix of older homes, basement suites, garages under living areas, warehouses, and commercial upgrades. Spray foam can solve heat loss and air leakage when the surface and fire-protection plan are ready.

Older homes leak through rim joists, crawl spaces, attics, and garage ceilings. Newer builds still need clean continuity at transitions. Foam helps when the assembly is right.

We serve Burnaby with plain quotes, clear scheduling, and tidy crews. Call 604-373-9598.

Crawl space foam
Attic foam
Garage ceiling foam
Basement wall foam
Rim joist sealing
Commercial foam

Neighbourhood coverage

We know the pockets.

We serve Brentwood, Metrotown, Capitol Hill, Burnaby Heights, Edmonds, Deer Lake, South Slope, Willingdon Heights, and nearby Burnaby areas.

Small access hatch? Tight driveway? Sloped lot? Strata rules? We ask early so the quote matches the real job, not a fantasy version of it.

That saves time. That saves money. That saves callbacks.

Brentwood
Metrotown
Capitol Hill
Burnaby Heights
Edmonds
Deer Lake
South Slope
Willingdon Heights

Quote path

Photos help. A site visit helps more.

Send photos of the space, rough measurements, access points, and what problem you want solved. We can usually tell if the project is a good spray foam candidate before the visit.

For bigger work, we walk it. Moisture, ventilation, ignition barrier, substrate, and thickness all matter.

Then you get a simple number and a simple plan.

Call or send photos
We check the assembly
You get a clean quote
Crew sprays and cleans up

Code-ready work

Foam is only good when the prep is good.

Spray foam is not paint. It is a building envelope decision. We check moisture, access, ventilation, ignition-barrier needs, and assembly type before the rig starts.

For medium-density closed-cell polyurethane foam, BC code references CAN/ULC-S705.1 for the material standard. Installation details matter. Product, applicator, substrate, lift thickness, and curing conditions all need respect.

Simple rule. Right foam. Right place. Right thickness. Clean site. No mystery.

Moisture check before install
Open-cell vs closed-cell explained
Fire and thermal barrier conversation
Clean cut lines and sealed penetrations

Vancouver climate

Wet coast. Cold drafts. Tight cavities.

Greater Vancouver homes see rain, damp crawl spaces, older framing, and heat loss through rim joists, attics, garages, and basement walls. Spray foam helps because it insulates and air seals at the same time.

Closed-cell foam can add a strong air and vapour-control layer where the assembly calls for it. Open-cell foam can fit some interior sound and air-sealing uses. The best answer depends on the wall, roof, crawl space, and permit path.

We do not guess. We look first. Then we quote.

Crawl spaces
Rim joists
Garage ceilings
Attics and rooflines
Basement walls
Commercial metal buildings

Map

Greater Vancouver Area.

We focus on Vancouver, West Vancouver, North Vancouver, Burnaby, and nearby Lower Mainland communities.

Ask if we serve your address

Questions

Fast answers.

How much does spray foam insulation Burnaby cost?

It depends on access, square footage, thickness, foam type, masking, removal, and whether ignition or thermal protection is needed. Call 604-373-9598 and we will price the real job.

Do you use open-cell or closed-cell foam?

Both can make sense. Closed-cell is common for air sealing, moisture control, and high R-value per inch. Open-cell can fit some interior and sound-control uses. The assembly decides.

Can spray foam help with drafts?

Yes. Spray foam expands into cracks and gaps, so it can reduce air leakage where batts alone leave paths for cold air.

Do I need to leave during install?

Usually yes during spraying and curing. We will explain timing before the job so people, pets, and trades stay clear.

Do you serve all of Greater Vancouver?

Yes. We focus on Vancouver, West Vancouver, North Vancouver, Burnaby, and nearby Lower Mainland areas.